Crisafulli Submersible Hydraulic PumpsTM

J-Series Severe Duty

 

Performance capabilities range from 200 to 1800 GPM depending on the size selected. Total Dynamic Heads (TDH) range from 20 feet to 120 feet, depending on the pump size and hydraulic motor selected. See below for GPM and TDH for each model listed.

Description. SRS Crisafulli J-Series, hydraulic powered pumps are portable, submersible pumps built for a variety of sludge & slurry applications. The Severe Duty pumps are equipped with a precision machined drive shaft, an enclosed oil filled bearing column, mechanical shaft seals, abrasion resistant, heat treated alloy pump volute & semi-open impeller (Brinell 400 hardness), heavy-duty hydraulic motor, and gray epoxy paint. All pumps have suction stands and threaded discharges (other discharge finishes available upon request).
Pump Size Inches
Flow - GPM
TDH - Feet
Solids Passing Capability Inches
SRSC Part Number
Motor Part Number
Est. weight - pounds
2
200
50
.9375
HY029V-2505
HM2520
140
2
200
65
.9375
HY029V-2507
HM2525
140
2.5
280
20
1.50
HY252V-2505
HM2505
155
2.5
300
40
1.50
HY252V-2507
HM2507
160
2.5
270
60
1.50
HY252V-2510
HM2510
165
2.5
300
80
1.50
HY252V-2515
HM2510
170
3
650
50
1.9375
HY039V-2510
HM2510
175
3
650
60
1.9375
HY039V-2515
HM2510
185
3
750
90
1.9375
HY039V-2520
HM2510
190
3
840
100
1.9375
HY039V-2525
HM2510
195
4
800
60
2.75
HY049V-2525
HM2525
295
4
1,200
70
2.75
HY049V-3730
HM3730
305
4
1,020
60
2.75
HY049V-7620
HM7620
315
4
1,500
120
2.75
HY049V-7625
HM7625
320
6
1,800
80
3.00
HY069V-7630
HM7630
475
Standard Options
Hydraulic Slurry Gate (price is same for each size pump). “Slurry Gate” is opened to agitate and slurry the pond. Solids and liquids are drawn into the pump, blended and injected through the slurry gate into unmixed material. After a period of time, depending on material thickness, the entire pit will be slurried and the operator can close the slurry gate hydraulically from the bank. The pump will then pump the material out at high volume. No separate agitator or mixer pumps are needed. One SRS Crisafulli pump does it all.
Stainless Steel Pump
Hydraulic Slurry Gate
Crisafulli Diesel/Hydraulic Power Units
Crisafulli Electric/Hydraulic Power Units
Hydraulic Hose & Fittings
WARNING - During pump operation the return hydraulic hose pressure should not exceed 100 PSI. Some control valves may cause peak over pressuring during shutdown. If the return hydraulic hose pressure may exceed 100 PSI, then consult the factory.